Jeep P1251: Vacuum Reservoir Solenoid Short-To-Ground Circuit
Is your scanner showing Jeep P1251?
No worries. We'll show you what it means and how to deal with it.
Jeep P1251: Vacuum Reservoir Solenoid Short-To-Ground Circuit
OVERVIEWWhat Does The Jeep P1251 Code Mean?
Ignition on; solenoid commanded ON. If the ECM does not detect a voltage signal on the Vacuum Reservoir Solenoid control circuit, this DTC will set.
What Are The Potential Causes Of The Jeep P1251 Code?
- Intermittent condition
- ASD Relay output circuit is open
- VR Solenoid control circuit is open or shorted to ground
- VR Solenoid or ECM has failed
Recommended Parts
Below are some recommended auto parts to help you address the trouble code affecting your vehicle and get it running smoothly again:
>>> WORKPRO 582-piece Crimp Terminals, Wire Connectors, Heat Shrink Tube, Electrical Repair Kit
>>> 12V Auto Waterproof Fuse Relay Box Block Kit
Note: During the purchasing process, please check carefully whether the part you want to buy fits your car!
Reference Sources
Jeep P1251, DTCDECODE.
